Quick Order Form
Clock
Dials
Clock
Hands
Clock Hands
Mounting
Instructions
1-7/16"
(37mm)
Clock Inserts
2-1/4"
Clock Inserts
2-3/4"
(70mm)
Clock Inserts
2"
(50mm)
Clock Inserts
3-1/2"
(90mm)
Clock Inserts
3-1/4"
Oval Clock Inserts
4"
Clock Inserts
8-1/2"
Clock Inserts
Compact
Clock
Movements
Standard
Clock
Movements
Tide Clock
Movements
and Dials
Clock and Pen Desk
Accessories
Clock Inserts and Dials Sale
HOME
Gift Certificate
Pendulum, Chime, Wesminster Quartz Clock Movements
Wholesale clock movements always in stock!
1
2
3
Next
Westminster Chime Quartz (up to 3/8" thick dial face)
Q-25
Full-sized quartz movement plays the traditional Westminster Chimes melody of a grandfather clock every quarter hour, as well as counting out the hours on the hour. A great choice for wall, desk and mantle clocks. Movement is 3in. wide x 3-3/4in. high. It has a front loading hanger, a step second hand and runs on a single 'C' cell battery. Free hands and mounting hardware included. One year warranty.
Don't forget to order your FREE set of clock hands (set includes hour, minute and second hand).
Westminister Chime
These instructions are for the Q-25, Q-27 (non pendulum) and the Q-53, Q-55 and Q-57 (with pendulum) Westminster chime movements. All of these models plays the full Westminster chime melody on the hour with an hour count. they also play a partial melody increasing on every 1/4 hour.
When setting these movements do not expect the 1/4 hour chimes to begin playing until the movement has been operating for at least one hour.
Once the movement has been installed in your clock case using the center fixation nut, you are ready to set the chimes.
Install a fresh "C" cell battery in the position indicated in the battery well.
Turn the black hand setting knob in the direction indicated on the back of the movement. Turn this knob until a feint "click" is heard. This will indicate that the minute hand shaft is positioned at the 12:00 position. At this time the Westminister chime melody will start playing followed by an hour count. Count the number of hours counted after the chime melody has just been counted.
Press the hour hand on the hour hand shaft in the position indicated by the number of hours just counted if you look closely you will notice that there is a small slot in the hour hand tube that is pointing towards the hour that has just been counted.
Press the minute hand on at the 12:00 position. Secure by mounting the small minute hand fixation nut.
If you are using a second hand now is the time to press it onto the second shaft in the 12:00 position.
If you have the pendulum version of one of these chime movements, remove the pendulum hanger from the shipping position by pulling it towards the back of the movement. Now install the pendulum rod and bob.
Let the movement run for an hour or two. Check to be sure that the chime melody is being played on the hour. If not, There is a white "final adjustment" slotted screw on the back of the movement that will enable you to make this adjustment. Each one of these indicators around this screw corresponds to one minute of error. Turn this screw as needed and wait until the next hour is played to see if you have made enough or to much of an adjustment.
Quantity
1 - 4
5 - 9
10 - 24
25 - 99
100+
Price
$45.37
$41.05
$38.89
$34.57
$31.33
Each
Quantity:
Westminster Chime Quartz (up to 5/8" thick dial face)
Q-27
Full-sized quartz movement plays the traditional Westminster Chimes melody of a grandfather clock every quarter hour, as well as counting out the hours on the hour. A great choice for wall, desk and mantle clocks. Movement is 3in. wide x 3-3/4in. high. It has a front loading hanger, a step second hand and runs on a single 'C' cell battery. Free hands and mounting hardware included. One year warranty.
Don't forget to order your FREE set of clock hands (set includes hour, minute and second hand).
Westminister Chime
These instructions are for the Q-25, Q-27 (non pendulum) and the Q-53, Q-55 and Q-57 (with pendulum) Westminster chime movements. All of these models plays the full Westminster chime melody on the hour with an hour count. they also play a partial melody increasing on every 1/4 hour.
When setting these movements do not expect the 1/4 hour chimes to begin playing until the movement has been operating for at least one hour.
Once the movement has been installed in your clock case using the center fixation nut, you are ready to set the chimes.
Install a fresh "C" cell battery in the position indicated in the battery well.
Turn the black hand setting knob in the direction indicated on the back of the movement. Turn this knob until a feint "click" is heard. This will indicate that the minute hand shaft is positioned at the 12:00 position. At this time the Westminister chime melody will start playing followed by an hour count. Count the number of hours counted after the chime melody has just been counted.
Press the hour hand on the hour hand shaft in the position indicated by the number of hours just counted if you look closely you will notice that there is a small slot in the hour hand tube that is pointing towards the hour that has just been counted.
Press the minute hand on at the 12:00 position. Secure by mounting the small minute hand fixation nut.
If you are using a second hand now is the time to press it onto the second shaft in the 12:00 position.
If you have the pendulum version of one of these chime movements, remove the pendulum hanger from the shipping position by pulling it towards the back of the movement. Now install the pendulum rod and bob.
Let the movement run for an hour or two. Check to be sure that the chime melody is being played on the hour. If not, There is a white "final adjustment" slotted screw on the back of the movement that will enable you to make this adjustment. Each one of these indicators around this screw corresponds to one minute of error. Turn this screw as needed and wait until the next hour is played to see if you have made enough or to much of an adjustment.
Quantity
1 - 4
5 - 9
10 - 24
25 - 99
100+
Price
$45.37
$41.05
$38.89
$34.57
$31.33
Each
Quantity:
6 Melody Chime Movement (up to 3/8" thick dial face)
Q-29
Choose from Ave Maria, Over the Rainbow. Try to Remember, Happy Birthday, Westminster Chime and Rudolph the Red Nosed Reindeer by turning the selection knob on the back of the movement. Every hour the chosen melody will play. Movement is 3in. wide x 3-3/4in. high x 1-1/4in. deep. It has a front loading hanger, a step second hand and runs on a single 'C' cell battery. Free hands and mounting hardware included. 1 year warranty.
Don't forget to order your FREE set of clock hands (set includes hour, minute and second hand).
Quantity
1 - 4
5 - 9
10 - 24
25 - 99
100+
Price
$46.30
$41.90
$39.69
$35.28
$31.98
Each
Quantity:
Mini Pendulum Quartz Mvt (up to 1/8" thick dial face)
Q-31
Ideal for compact cases, it has a step second hand, runs on a single 'AA' battery and comes with a 10 year warranty. It is 2-1/8in. wide x 3-3/8in. high x 7/8in. deep. Free set of hands, mounting hardware and adjustable Brass Pendulum Bob (3 sizes to choose from) included with each movement.
Don't forget to order your FREE set of clock hands (set includes hour, minute and second hand).
Quantity
1 - 4
5 - 9
10 - 24
25 - 99
100+
Price
$14.15
$13.47
$12.12
$10.78
$9.77
Each
Quantity:
Mini Pendulum Quartz Mvt (up to 3/8" thick dial face)
Q-33
Ideal for compact cases, it has a step second hand, runs on a single 'AA' battery and comes with a 10 year warranty. It is 2-1/8in. wide x 3-3/8in. high x 7/8in. deep. Free set of hands, mounting hardware and adjustable Brass Pendulum Bob (3 sizes to choose from) included with each movement.
Don't forget to order your FREE set of clock hands (set includes hour, minute and second hand).
Quantity
1 - 4
5 - 9
10 - 24
25 - 99
100+
Price
$14.15
$13.47
$12.12
$10.78
$9.77
Each
Quantity:
Mini Pendulum Quartz Mvt (up to 5/8" thick dial face)
Q-35
Ideal for compact cases, it has a step second hand, runs on a single 'AA' battery and comes with a 10 year warranty. It is 2-1/8in. wide x 3-3/8in. high x 7/8in. deep. Free set of hands, mounting hardware and adjustable Brass Pendulum Bob (3 sizes to choose from) included with each movement.
Don't forget to order your FREE set of clock hands (set includes hour, minute and second hand).
Quantity
1 - 4
5 - 9
10 - 24
25 - 99
100+
Price
$14.15
$13.47
$12.12
$10.78
$9.77
Each
Quantity:
Mini Pendulum Quartz Mvt (up to 3/4" thick dial face)
Q-37
Ideal for compact cases, it has a step second hand, runs on a single 'AA' battery and comes with a 10 year warranty. It is 2-1/8in. wide x 3-3/8in. high x 7/8in. deep. Free set of hands, mounting hardware and adjustable Brass Pendulum Bob (3 sizes to choose from) included with each movement.
Don't forget to order your FREE set of clock hands (set includes hour, minute and second hand).
Quantity
1 - 4
5 - 9
10 - 24
25 - 99
100+
Price
$14.15
$13.47
$12.12
$10.78
$9.77
Each
Quantity:
Pendulum Quartz Mvt (up to 3/8" thick dial face)
Q-42
High quality movement comes with a 10 year warranty. It has a front loading hanger, a step second hand and runs on a single 'C' cell battery. This movement is 3in. wide x 3-1/2in. high x 1in. deep. Free set of hands, mounting hardware and adjustable Brass Pendulum Bob (3 sizes to choose from) included with each movement.
Don't forget to order your FREE set of clock hands (set includes hour, minute and second hand).
Quantity
1 - 4
5 - 9
10 - 24
25 - 99
100+
Price
$16.22
$15.45
$13.90
$12.36
$11.21
Each
Quantity:
Pendulum Quartz Mvt (up to 5/8" thick dial face)
Q-44
High quality movement comes with a 10 year warranty. It has a front loading hanger, a step second hand and runs on a single 'C' cell battery. This movement is 3in. wide x 3-1/2in. high x 1in. deep. Free set of hands, mounting hardware and adjustable Brass Pendulum Bob (3 sizes to choose from) included with each movement.
Don't forget to order your FREE set of clock hands (set includes hour, minute and second hand).
Quantity
1 - 4
5 - 9
10 - 24
25 - 99
100+
Price
$16.22
$15.45
$13.90
$12.36
$11.21
Each
Quantity:
Pendulum Quartz Mvt (up to 3/4" thick dial face)
Q-46
High quality movement comes with a 10 year warranty. It has a front loading hanger, a step second hand and runs on a single 'C' cell battery. This movement is 3in. wide x 3-1/2in. high x 1in. deep. Free set of hands, mounting hardware and adjustable Brass Pendulum Bob (3 sizes to choose from) included with each movement.
Don't forget to order your FREE set of clock hands (set includes hour, minute and second hand).
Quantity
1 - 4
5 - 9
10 - 24
25 - 99
100+
Price
$16.22
$15.45
$13.90
$12.36
$11.21
Each
Quantity:
Westminster Pendulum Qtz Mvt (up to 3/8" thick dial face)
Q-53
Full-sized quartz movement plays the traditional Westminster Chimes melody of a grandfather clock every quarter hour, as well as counting out the hours on the hour. A great choice for wall, desk and mantle clocks. Movement is 3in. wide x 3-3/4in. high. It has a front loading hanger, a step second hand and runs on a single 'C' cell battery. Free hands and mounting hardware included. Adjustable Brass Pendulum Bob included. One year warranty.
Don't forget to order your FREE set of clock hands (set includes hour, minute and second hand).
Westminister Chime
These instructions are for the Q-25, Q-27 (non pendulum) and the Q-53, Q-55 and Q-57 (with pendulum) Westminster chime movements. All of these models plays the full Westminster chime melody on the hour with an hour count. they also play a partial melody increasing on every 1/4 hour.
When setting these movements do not expect the 1/4 hour chimes to begin playing until the movement has been operating for at least one hour.
Once the movement has been installed in your clock case using the center fixation nut, you are ready to set the chimes.
Install a fresh "C" cell battery in the position indicated in the battery well.
Turn the black hand setting knob in the direction indicated on the back of the movement. Turn this knob until a feint "click" is heard. This will indicate that the minute hand shaft is positioned at the 12:00 position. At this time the Westminister chime melody will start playing followed by an hour count. Count the number of hours counted after the chime melody has just been counted.
Press the hour hand on the hour hand shaft in the position indicated by the number of hours just counted if you look closely you will notice that there is a small slot in the hour hand tube that is pointing towards the hour that has just been counted.
Press the minute hand on at the 12:00 position. Secure by mounting the small minute hand fixation nut.
If you are using a second hand now is the time to press it onto the second shaft in the 12:00 position.
If you have the pendulum version of one of these chime movements, remove the pendulum hanger from the shipping position by pulling it towards the back of the movement. Now install the pendulum rod and bob.
Let the movement run for an hour or two. Check to be sure that the chime melody is being played on the hour. If not, There is a white "final adjustment" slotted screw on the back of the movement that will enable you to make this adjustment. Each one of these indicators around this screw corresponds to one minute of error. Turn this screw as needed and wait until the next hour is played to see if you have made enough or to much of an adjustment.
Quantity
1 - 4
5 - 9
10 - 24
25 - 99
100+
Price
$45.37
$43.21
$38.89
$34.57
$31.33
Each
Quantity:
Westminster Pendulum Qtz Mvt (up to 5/8" thick dial face)
Q-55
Full-sized quartz movement plays the traditional Westminster Chimes melody of a grandfather clock every quarter hour, as well as counting out the hours on the hour. A great choice for wall, desk and mantle clocks. Movement is 3in. wide x 3-3/4in. high. It has a front loading hanger, a step second hand and runs on a single 'C' cell battery. Free hands and mounting hardware included. Adjustable Brass Pendulum Bob included. One year warranty.
Don't forget to order your FREE set of clock hands (set includes hour, minute and second hand).
Westminister Chime
These instructions are for the Q-25, Q-27 (non pendulum) and the Q-53, Q-55 and Q-57 (with pendulum) Westminster chime movements. All of these models plays the full Westminster chime melody on the hour with an hour count. they also play a partial melody increasing on every 1/4 hour.
When setting these movements do not expect the 1/4 hour chimes to begin playing until the movement has been operating for at least one hour.
Once the movement has been installed in your clock case using the center fixation nut, you are ready to set the chimes.
Install a fresh "C" cell battery in the position indicated in the battery well.
Turn the black hand setting knob in the direction indicated on the back of the movement. Turn this knob until a feint "click" is heard. This will indicate that the minute hand shaft is positioned at the 12:00 position. At this time the Westminister chime melody will start playing followed by an hour count. Count the number of hours counted after the chime melody has just been counted.
Press the hour hand on the hour hand shaft in the position indicated by the number of hours just counted if you look closely you will notice that there is a small slot in the hour hand tube that is pointing towards the hour that has just been counted.
Press the minute hand on at the 12:00 position. Secure by mounting the small minute hand fixation nut.
If you are using a second hand now is the time to press it onto the second shaft in the 12:00 position.
If you have the pendulum version of one of these chime movements, remove the pendulum hanger from the shipping position by pulling it towards the back of the movement. Now install the pendulum rod and bob.
Let the movement run for an hour or two. Check to be sure that the chime melody is being played on the hour. If not, There is a white "final adjustment" slotted screw on the back of the movement that will enable you to make this adjustment. Each one of these indicators around this screw corresponds to one minute of error. Turn this screw as needed and wait until the next hour is played to see if you have made enough or to much of an adjustment.
Quantity
1 - 4
5 - 9
10 - 24
25 - 99
100+
Price
$45.37
$43.21
$38.89
$34.57
$31.33
Each
Quantity:
Westminster Pendulum Qtz Mvt (up to 3/4" thick dial face)
Q-57
Full-sized quartz movement plays the traditional Westminster Chimes melody of a grandfather clock every quarter hour, as well as counting out the hours on the hour. A great choice for wall, desk and mantle clocks. Movement is 3in. wide x 3-3/4in. high. It has a front loading hanger, a step second hand and runs on a single 'C' cell battery. Free hands and mounting hardware included. Adjustable Brass Pendulum Bob included. One year warranty.
Don't forget to order your FREE set of clock hands (set includes hour, minute and second hand).
Westminister Chime
These instructions are for the Q-25, Q-27 (non pendulum) and the Q-53, Q-55 and Q-57 (with pendulum) Westminster chime movements. All of these models plays the full Westminster chime melody on the hour with an hour count. they also play a partial melody increasing on every 1/4 hour.
When setting these movements do not expect the 1/4 hour chimes to begin playing until the movement has been operating for at least one hour.
Once the movement has been installed in your clock case using the center fixation nut, you are ready to set the chimes.
Install a fresh "C" cell battery in the position indicated in the battery well.
Turn the black hand setting knob in the direction indicated on the back of the movement. Turn this knob until a feint "click" is heard. This will indicate that the minute hand shaft is positioned at the 12:00 position. At this time the Westminister chime melody will start playing followed by an hour count. Count the number of hours counted after the chime melody has just been counted.
Press the hour hand on the hour hand shaft in the position indicated by the number of hours just counted if you look closely you will notice that there is a small slot in the hour hand tube that is pointing towards the hour that has just been counted.
Press the minute hand on at the 12:00 position. Secure by mounting the small minute hand fixation nut.
If you are using a second hand now is the time to press it onto the second shaft in the 12:00 position.
If you have the pendulum version of one of these chime movements, remove the pendulum hanger from the shipping position by pulling it towards the back of the movement. Now install the pendulum rod and bob.
Let the movement run for an hour or two. Check to be sure that the chime melody is being played on the hour. If not, There is a white "final adjustment" slotted screw on the back of the movement that will enable you to make this adjustment. Each one of these indicators around this screw corresponds to one minute of error. Turn this screw as needed and wait until the next hour is played to see if you have made enough or to much of an adjustment.
Quantity
1 - 4
5 - 9
10 - 24
25 - 99
100+
Price
$45.37
$43.21
$38.89
$34.57
$31.33
Each
Quantity:
Pendulum Rod&Bob 2-1/8" Brass
QB-218
All of our pendulum movements come with brass pendulum rod and bobs. The solid brass rods adjust down from 16in. in 1in. increaments by breaking at scored lines. Please choose one free with purchase of movement.
$0.00
Quantity:
Pendulum Rod&Bob 2-3/4" Brass
QB-234
All of our pendulum movements come with brass pendulum rod and bobs. The solid brass rods adjust down from 16in. in 1in. increaments by breaking at scored lines. Please choose one free with purchase of movement.
$0.00
Quantity:
Pendulum Rod&Bob 3-1/2" Brass
QB-312
All of our pendulum movements come with brass pendulum rod and bobs. The solid brass rods adjust down from 16in. in 1in. increaments by breaking at scored lines. Please choose one free with purchase of movement.
$0.00
Quantity:
1
2
3
Next
Canada Website
USA Website (you are here)
Copyright © 2000-2009. Bear Woods Supply Co. Inc. All rights reserved.
