- 3 Year Guarantee
- Removeable Back Cover
- Operates on one in.'N' battery (not included)
- Fits into 2-3/8in. hole
3 1/4" Oval Quartz Clock Fit-up
This oval fit-up uses one "N" cell battery and is designed to fit into a 2
3/8" mounting hole.
To Start The Clock:
Set the front of the clock
on a soft surface to avoid scratching. While facing the back of the clock remove
the soft rubber gasket. The whole back of the clock acts as a battery cover.
Remove the battery cover by pulling up. There is a small opening at the three
o'clock position that will make this casier. Once the battery cover has been
removed insert one "N" cell battery into the battery well. Be sure to install
the battery in the position indicated in the battery well with the positive +
side to the right.
Before replacing the back cover, turn the rear mounted
hand set knob until the current time is reached. Snap the cover back into place
and return the soft rubber gasket to its original position.
To Install
The clock:
With the battery installed, and the clock set to the current
time, press the clock into the 2 3/8" hole in your clock case.
