Scroll Saw Chuck Heads by Pegas - For Excalibur type saws

Upgrade your Scroll Saw with Pegas Blade Chuck Heads - 40% lighter, Less Vibration.

See list below for compatibility - This version also works with DeWalt and Delta models listed below.

Upper and Lower Scroll Saw Blade Clamp Replacement Set. These new “Blade Chuck Heads” (also known as Scroll Saw Blade Clamps) were developed in Switzerland by Pégas in association with the HEIG engineering school in Yverdon.
The studies and the tests demonstrated that the weight of these heads is in direct relation with the service life and the vibrations of the machine.

1) These new heads, manufactured with aeronautical aluminum for resilience and optimal weight, are 40 % lighter than you original Heads.

2) Vibration will be greatly reduced

3) Changing Blades is easier and faster

4) Better protection of the mechanical parts of the scroll saw.

As you can see, they are clearly more compact than original heads and even easier of use. The assembly of these new Heads is very simple and takes only a few minutes.

Note - The Set Screws and Thumb Screws are wear parts on any blade clamps, and should be replaced every few months or couple of years depending on how much you use your scroll saw - Click here to see our selection of renewal kits.

Blade Chuck Version Comparison	Components	Suitable For Which Saws	Reviews and Assembly Instructions
1) SS-PEGAS-CHUCK The Original	Top and Bottom Scroll Saw Blade Clamps plus Tension Lever	Suitable for all EXCALIBUR (green, Anniversary and black models), EXCELSIOR, SEYCO ST-21 and KING Scroll Saws. Lots of people are already loving them for the DeWalt 788 and Delta 690 as well.	Review by Steve Good.
2) SS-DWPEGAS-CHUCK	Top and Bottom Clamp replacement (No tension lever as there is one at the front of these saws)	For DeWalt 788 and Delta 690	Review by Steve Good.
3) SS-JETPEGAS-CHUCK	Bottom Blade Clamp replacement. (Want to change both clamps? Order the Original.	JET JWSS-22 Scroll Saw.	See Steve's comments in the post on the Original. Review by Steve Good.

All parts are included to make this quick and simple scroll saw blade clamp replacement. Steve Good's review also shows how to remove your existing blade clamps and install the new one.

Scroll Saw Chuck Heads by Pegas - For Excalibur type saws

Your name we can display:

Your email (not displayed):

Highlight (eg "happy customer" or "great quality"):

Write your review:

Remaining characters:

Upgrade your Scroll Saw with Pegas Blade Chuck Heads - 40% lighter, Less Vibration.

All parts are included to make this quick and simple scroll saw blade clamp replacement. Steve Good's review also shows how to remove your existing blade clamps and install the new one.