What is the best part about Walrus Oil? Well, that is hard to answer, but one of its best features is being easy to use. You work hard to create, design, carve, sand. Use a wood finishing oil that will make your project last a lifetime.
How to Apply Furniture Finish Oil
For best results, prepare unfinished wood by sanding to approximately 220–600 grit and removing all dust.
- Shake the container well before use.
- Apply a thin, even coat using a clean cloth, brush, or applicator.
- Allow the oil to penetrate and cure for 12–24 hours.
- Wipe away any excess oil that remains on the surface.
- Repeat with additional thin coats until the desired level of protection is achieved.
For deeper penetration into dense hardwoods, the oil may be thinned with a natural solvent during the initial coat.
Walrus Oil is Available As
- Pure Tung Oil
- Furniture Polish
- Wood Wax for Cutting Boards
- Cutting Board Oil
- Logger's Lip Balm (This one is for you though)
Why Walrus Oil?
- 100% Pure Tung Oil
- Naturally water-resistant once fully cured
- Safe for food-contact surfaces after full cure
- Enhances the wood's natural color and grain
- VOC-free and free of added chemical dryers
- Long-lasting protection with minimal maintenance
- Ideal for hobbyists, furniture makers, and professional woodworkers
