Description
8-inch Dime Tip Chainsaw Carving Bar
Work on small contours and detailed wood sculpture with the Cannon 8-inch Dime Tip carving bar. Its compact nose gives carvers access to tight areas, while the .043-inch (1.1 mm) groove specifies the matching chain gauge.
Check your setup: Requires 1/4-inch pitch chain and a matching 1/4-inch drive sprocket. Chain gauge must match this .043-inch bar. Cannon recommends dime tip .043 bars for petrol saws 40cc and under. For battery/electric saws, confirm the specific setup with Cannon. Chain and drive sprocket are not included.
Specifications
| Manufacturer part number | CCD-C1-8-43 |
|---|---|
| Bear Woods SKU | CA-D08-43 |
| Bar length | 8 inches (20.32 cm nominal) |
| Tip style | Dime Tip |
| Approximate nose diameter | 3/4 inch |
| Mount | C1 |
| Chain gauge | .043 inch (1.1 mm) |
| Country of origin | Canada |
| Contents | One guide bar; chain and drive sprocket not included |
Chain configurations
| Chain pitch | Drive links |
|---|---|
| 1/4 inch (0.250) | 48 |
Made in Canada by Cannon Bar Works Ltd.
| Manufacturer part number | CCD-C1-8-43 |
|---|---|
| Bear Woods SKU | CA-D08-43 |
| Bar length | 8 inches (20.32 cm nominal) |
| Tip style | Dime Tip |
| Approximate nose diameter | 3/4 inch |
| Mount | C1 |
| Chain gauge | .043 inch (1.1 mm) |
| Country of origin | Canada |
| Contents | One guide bar; chain and drive sprocket not included |
| Chain pitch | Drive links |
|---|---|
| 1/4 inch (0.250) | 48 |
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Requires 1/4-inch pitch chain and a matching 1/4-inch drive sprocket. Chain gauge must match this .043-inch bar. Cannon recommends dime tip .043 bars for petrol saws 40cc and under. For battery/electric saws, confirm the specific setup with Cannon. Chain and drive sprocket are not included.
Keep the bar groove and oil passages clear and follow the saw and chain manufacturer's tensioning, lubrication and operating instructions.
