Hardwood Birch Dowels 3/16" by 12" (Per 10)

Sized properly

I have not got to the plans yet; but going over them, they look very good and complete.

Cosistantly good quality and value. Work really well with AC-018 axle caps

The product is more-or-less as described and met my needs. By more-or-less, I mean don't expect the diameter of this tiny dowel to be absolutely spot-on and don't expect it to be precisely round (although in both respects it's damned close and better than the 1/8" dowel). It's definitely good value for the price. You can't see the out-of-round just looking at the dowel or the finished item, but you can see it when you stick it into a drilled hole. If you want to cut it to length without chip-out, you'll need to make a jig to support it all around as the blade passes through. The jig is a piece of scrap wood with a hole in it of the same diameter as the dowel.

What a bargain! These dowels measured a few thousandths oversize and were a very tight fit in a 3/16" drilled hole. That's much better than undersize because I just stuck them in a drill and sanded them down. The cross-section was circular and the wood high quality. I can't get over the low price.