Westminster Chime + Pendulum Quartz Clock Movement (up to 3/8" thick dial face) - Clock Parts | Clock Dials & Faces - Bear Woods Supply
Westminster Chime + Pendulum Quartz Clock Movement (up to 3/8" thick dial face) - Clock Parts | Clock Dials & Faces - Bear Woods Supply
Westminster Chime + Pendulum Quartz Clock Movement (up to 3/8" thick dial face) - Clock Parts | Clock Dials & Faces - Bear Woods Supply
Westminster Chime + Pendulum Quartz Clock Movement (up to 3/8" thick dial face) - Clock Parts | Clock Dials & Faces - Bear Woods Supply
Roll over image to zoom in Click on image to zoom
Westminster Chime + Pendulum Quartz Clock Movement (up to 3/8" thick dial face) - Clock Parts | Clock Dials & Faces - Bear Woods SupplyWestminster Chime + Pendulum Quartz Clock Movement (up to 3/8" thick dial face) - Clock Parts | Clock Dials & Faces - Bear Woods SupplyWestminster Chime + Pendulum Quartz Clock Movement (up to 3/8" thick dial face) - Clock Parts | Clock Dials & Faces - Bear Woods SupplyWestminster Chime + Pendulum Quartz Clock Movement (up to 3/8" thick dial face) - Clock Parts | Clock Dials & Faces - Bear Woods Supply

Westminster Chime + Pendulum Quartz Clock Movement (up to 3/8" thick dial face)

SKU: Q-53

westminster chime and pendulum quartz clock movement

Price:
$89.99 USD

Description

**When repairing a clock we always recommend new hands as your old ones may not fit.


Stock #

For Clock Dials / 
Face Material Up To:

Threaded Shaft Length

Overall Shaft Length

Q-53

3/8" thick

7/16"

3/4"

Runs Clock hands up to 4-1/2" Long.  Want to make a larger clock? Consider High Torque Pendulum Clock Movements which will run hands up to 18" Long.

  • The maximum capacity for pendulums on this movement is 100 grams (3-1/2 ounces).
  • Pendulums swing without battery power - using momentum and magnet. Keep your clock level and perpendicular to the ground for continuous pendulum motion. For a battered powered pendulum consider our Heavy Duty Pendulum Drive QB-DRV

    • Hardware Included

  • Brass Washer
  • Hex Nut
  • Open End Nut


    • Optional Hardware

    Add an Black Endcap for $0.50
    or Add an Endcap for $0.50

    Customer Reviews

    Based on 16 reviews
    56%
    (9)
    25%
    (4)
    19%
    (3)
    0%
    (0)
    0%
    (0)
    M
    Mike Zodrow

    You include instructions on installing the movement especially settting the time correctly. I finally figured that out after researching and trial and error.

    J
    Jackie Horsley
    Happy Customer

    Had a very nice Howard Miller Westminster Chime wall clock for many years. It stopped working and I didn’t want to get rid of such a nice clock. Found the exact parts I needed at Bearwood. Very easy replacement of the clock movement had my clock working better than before. Very happy customer!

    G
    Gord Martens
    Downgrade in quality.

    New movement looks the same but quality greatly reduced from my previous movement. The chime is almost inaudible so I installed the speaker andvtube from the old one. Also it will not swing my pendulum.

    M
    Michael Cheatham
    Great quality

    The experience with your company was great as far as ordering and tge shipping was everything promised. However, I was unable to use the movement due to the shaft being too short. I should have measured better.

    B
    Bruce Johnston
    I will be a repeat customer if required

    Nice to have a transaction that is "no issues".

    123

    Payment & Security

    American Express Apple Pay Diners Club Discover Google Pay Mastercard Shop Pay Visa

    Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

    Learn how to set your Westminster Chime Clock Motor

    Install a FRESH Duracell or Energizer Battery (But not a rechargeable type).  In our experience, these are the only batteries that are reliable for clock mechanisms.

    Recently viewed