• faq
  • email Contact
  • help Help

5-7/8" Black Tapered Clock Hands

Average rating:
average rating 100%
3 reviews
Explore all reviews
Quantity   1 - 9     10 - 49     50+  
Price $8.75 $6.50 $5.50
Per set of hands
US NO TAX, Part #: QH-80
Checkout/Estimate Shipping

5-7/8" High Torque Hands - Black Tapered Style

The measurement is from the hole where the hands mount onto the high torque shaft to the tip.  Hour hands are proportionate.

Tips for making larger wall clocks:

1. Second hands not included - we don't recommend second hands with high torque movements as they draw too much power.  

2. Still want a second hand? - choose our balanced 10 inch red or black second hands that work with our Continuous Sweep (Silent) High Torque Motors.

3. Scroll down to select your movement to go with these hands. Or click here.

4.  These hands can be trimmed to a shorter length if you keep the hand balanced. (just put the mounting hole of the minute hand on your fingertip to check the balance) They can be spray painted another color.

Not sure what parts would work best for your project? Click here to learn how to select the right movement and hands.

Average rating:
average rating 100%
3 reviews

Write a Review || Explore all reviews

Featured positive reviews:

average rating 100%
Great service and information. 01/08/2020
By Donna Murphy
The service at Bear Woods is tops. New to a project like this so needed guidance. The clock hands as illustrated below, and as originally ordered, were recognized by the packer as not being compatible with the clock works ordered and thus a phone called from him put us on the right track. We changed our order on his advice and on our way to completing the project. Thank you Bear Woods Supply Company.
average rating 100%
Clock Parts 02/12/2019
By John Piccolo
Exactly what I was looking for. Shipping was fast.
average rating 100%
Great Quality 01/12/2020
By James A. Krentz
Excellent workmanship

how to choose clock movements and hands

How do I choose the right size clock motor & hands? 
1) Refer to the figure here, or Click Here for helpful info (a new window or tab will open)  

2) The size of hands is based on the length of the minute hand from the mounting hole to the end of the minute hand. (Figures 3 & 4) 

3) Our clock motors are sized by the thickness of the dial the movements can go through.  EG. High torque Q-64 will go through up to 5/8" thick material, while standard/mini motor Q-65 will go through 3/8" thick clock faces. (Figure 1 and  item "A" in Figure 2)

Tip 1)  If your material is too thick, consider removing some to in-set the clock.  Or if your clock face material is too thin, consider adding some material behind the face so the hands will sit closer to your clock face. 

Tip 2) Most hands can be slightly trimmed if need be.

Tip 3) Our customers also spray paint them. 

Customers also looked at: