/>
Navigation
> >

Pegas 30" Scroll Saw

Be the first one to write a review
  $1,399.00
Our Product Code: PEGAS-30-Scroll-Saw
Quantity: 
 
Checkout/Estimate Shipping
Share Share on Facebook Share on Pinterest

Shipping as soon as possible.


Pegas Scroll Saw - 30 Inch with Raising Arm and the Pegas Blade Clamps

30″ Throat Depth, Upper Arm Raises, Proven Motor and Linkage.
PLUS the game-changing Pegas Chuck Head that has helped so many saws improve.

Pegas® Scroll Saws are high-precision tools, which with a minimum amount of maintenance, will provide reliable service and great satisfaction for many years.
This scroll saw is developed in Switzerland - made in Taiwan to the rigorous specifications and quality requirements of Pegas.

 


 

The Pegas Scroll Saw - Why is it better?

This precision machined tool features a time-tested design enhanced by Swiss engineering. The Pegas Scroll Saw features a tilting-arm design that allows you to cut on an angle while the table stays flat. The arm tilts 45-degrees to the left and 35-degrees to the right (because of the dust collection nozzle). The top arm lifts, which makes it easy to top or bottom feed the scroll saw blades. The variable speed control, which sits on the top of the saw arm (in the front near the power switch) allows you to adjust from 400 to 1,500 rpms.

The saw comes complete with the revolutionary Pegas Blade Chuck Heads (a $95 value). These lightweight blade chucks grip blades better and reduce vibration. It also features a non-stick heavy-duty thick epoxy coating on the table that allows the projects to just glide around and reduces the chance of corrosion.


 

Pegas® Scroll Saws Offer Many Valuable Benefits!

 

A) - Head tilts left and right (45°/35°). The blade tilts rather than the table to achieve better control, precision and confort.

B) - Made of sheet steel with 7 mm thick solid table top (13.5 x 30 inches) with special coating for enhanced smoothness

C) - The upper arm lifts to allow easy and rapid blade changes: a real advantage for work involving various interior cuts - this makes threading blades a whole lot easier!

D) - Very quick blade changing thanks to the PEGAS BLADE CLAMPS. The manual blade-clamping system does not require the use of a tool.
Meanwhile the tensioning system allows the same tension to be applied to the blade whenever it is changed.

E) - Easy access to the start/stop switch and the speed regulator, positioned on the front of the upper arm.

F) - The onboard dust blower paired with the dust collector provide direct and efficient dust extraction.
To attach your vacuum to the dust collection port, you can slide a hose inside the port, or use expansion or reducing sleeves to connect your dust collection system.

Add the Pegas Foot Switch to your Scroll Saw Order for $33.50
Or Click Here to Learn about the Foot Switch

Quantity
Add the Stand made specifically for the Pegas Scroll Saw 30 Inch for $133.25
Or Click Here to Read about the Stand.

Add the fluorescent Inspection Lamp for $74 or Click here to Read about the 
Inspection Lamp with adjustable viewing arm.

Quantity
inspection lamp LED
Add the LED Inspection Lamp for $144.50 or Click here to Read about the 
Inspection Lamp with adjustable viewing arm.

inspection lamp
Add the Beginner's Sample Pack with 17 dozen blades for $54.95 or click here to learn more.

Add the Bestsellers Sample Pack with 24 dozen for $77.95 or Click here to learn more.



 

Excerpt from the review by Scroll Saw Woodworking and Crafts Magazine:

"The first branded Pégas Scroll Saw to hit the market does so with a bang, combining Swiss engineering with a proven design to set a new standard for higher-priced saws. These new units, made in the same factory as Excalibur saws (as well as Jet, King, Seyco, and a few brands sold in other countries), match the quality of those popular saws but include a key upgrade: they come with the revolutionary Pégas Blade Chuck Heads pre-installed.

Like Excalibur saws, the Pégas features a tilting arm controlled by a rack and pinion system that allows you to dial in an angle quickly and accurately. It also has a spring-loaded locating pin and matching holes for common angles, such as 0°, 45°, and 221/2°, to make it even easier to orient the arm. (Follow the instructions in the owner’s manual to check these angles when you get your saw; after I squared my blade to the table, I had to adjust the angle guide and locating pin to zero it in.) And conveniently, Pégas put the power switch and speed control at the front of the saw arm.

Most importantly, however, Pégas pre-installed their Blade Chuck Heads on the saw. This upgrade, a $90 value, reduces vibration noticeably and holds blades super-securely—incredibly, we put them on our shop saws nearly a year ago and have not had a single blade slip out of place since.
(See our review of them at scrollsawer.com/2019/09/07/product-review-pegas-blade-chuck-heads"

tilt-example

Specifications
Specifications 30" Scroll Saw from Pegas
Throat Depth (Blade to the back of the saw) 30 inches
Total Length | Width | Height 46.1 inches | 16.8 inches | 19.7 inches
Blade Tilt Range 45/35º
Max Cutting Depth 2.05 inches
Speed RPM | Motor 400 - 1400 RPM |1.5 Amp on 110V
Table Size 13.5 inches wide  x 30 inches deep
Weight | Origin 104 lbs | Taiwan

Warranty
2 year parts warranty.
Service directly from the manufacturer via their office in New Jersey, USA.  Need support on the saw? We'll provide you with contact information to speak to trained service staff who also has the support of a highly trained technician.  From time to time a part will need servicing beyond what we can help with by phone and sending parts.  In those cases, we'll arrange for the saw to be sent to New Jersey.


Shipping Details
Shipping Comes directly from our New Jersey Warehouse. Note: We're working on lowering the shipping rates so you may get a refund, but we also may have to charge a bit more depending on your location. Generally we see some locations getting refunds of up to $20, and others we ask for a bit more (up to around $20). Notably, there is an exception for outside continental USA which costs more. This product will ship within three business days of placing your order. Please note, we are not open on holidays or weekends.

Add the Pegas Foot Switch to your Scroll Saw Order for $33.50
Or Click Here to Learn about the Foot Switch

Quantity
Add the Stand made specifically for the Pegas Scroll Saw 30 Inch for $133.25
Or Click Here to Read about the Stand.

Add the fluorescent Inspection Lamp for $74 or Click here to Read about the 
Inspection Lamp with adjustable viewing arm.

Quantity
inspection lamp LED
Add the LED Inspection Lamp for $144.50 or Click here to Read about the 
Inspection Lamp with adjustable viewing arm.

inspection lamp
Add the Beginner's Sample Pack with 17 dozen blades for $54.95 or click here to learn more.

Add the Bestsellers Sample Pack with 24 dozen for $77.95 or Click here to learn more.

Check out some of our best-sellers!