• Fits up to 4-1/2" Clock Dial Diameter
Measurement refers to the length from the mounting hole in the minute hand to its pointer tip
• Includes Hour hand & Minute hand, Second Hand Sold Separately.
• Free with purchase of Standard Clock Movement For Making or Repairing Smaller Clocks
One free set of hands from selections marked at $0.00 price - Clock hands may be purchased without a clock movement at the noted price - search for our product code with an A at the end (eg QH-111A).
|
How do I choose the right size clock motor & hands? 2) The size of hands is based on the length of the minute hand from the mounting hole to the end of the minute hand. (Figures 3 & 4) 3) Our clock motors are sized by the thickness of the dial the movements can go through. EG. High torque Q-64 will go through up to 5/8" thick material, while standard/mini motor Q-11 will go through 1/8" thick clock faces. (Figure 1 and item "A" in Figure 2) Tip 1) If your material is too thick, consider removing some to in-set the clock. Or if your clock face material is too thin, consider adding some material behind the face so the hands will sit closer to your clock face. Tip 2) Most hands can be slightly trimmed if need be. Tip 3) Our customers also spray paint them. |
If you don't have your clock motor yet...
Click here to Choose Suitable Clock Motors that work with these hands.
Contact 
Help
Home
Wishlist
Account
Cart