• faq
  • email Contact
  • help Help
Navigation

8" Black Tapered and Rounded Clock Hands

Average rating:
average rating 100%
3 reviews
Explore all
Quantity   1 - 9     10 - 49     50+  
Price $14.95 $10.25 $9.50
Per set of hands
Part #: QH-81
Quantity: 
 
Checkout/Estimate Shipping

8" High Torque Hands - Black Curved Style

The measurement is from the hole where the hands mount onto the high torque shaft to the tip.  Hour hands are proportionate.

Tips for making larger wall clocks:

1. Second hands not included - we don't recommend second hands with high torque movements as they draw too much power.  

2. Still want a second hand? - choose our balanced 10 inch red or black second hands that work with our Continuous Sweep (Silent) High Torque Motors.

3. Scroll down to select your movement to go with these hands. Or click here.

4.  These hands can be trimmed to a shorter length if you keep the hand balanced. (just put the mounting hole of the minute hand on your fingertip to check the balance) They can be spray painted another color.

Not sure what parts would work best for your project? Click here to learn how to select the right movement and hands.

Average rating:
average rating 100%
3 reviews

Write a Review || Explore all

Featured positive reviews:

average rating 100%
Great Quality 12/16/2020
By Henry Caruso
Bought hands for a 20" wall clock I am building. Fit perfectly and look great!
average rating 100%
fits well 02/28/2021
By William Wimbish
The new hands fit the clock and new movement and look good.
average rating 100%
8in. Black tapered and rounded clock hands 04/15/2019
By Janice Shelton
Great look and excellent fit.
 
Tips

how to choose clock movements and hands

How do I choose the right size clock motor & hands? 
1) Refer to the figure here, or Click Here for helpful info (a new window or tab will open)  

2) The size of hands is based on the length of the minute hand from the mounting hole to the end of the minute hand. (Figures 3 & 4) 

3) Our clock motors are sized by the thickness of the dial the movements can go through.  EG. High torque Q-64 will go through up to 5/8" thick material, while standard/mini motor Q-65 will go through 3/8" thick clock faces. (Figure 1 and  item "A" in Figure 2)


Tip 1)  If your material is too thick, consider removing some to in-set the clock.  Or if your clock face material is too thin, consider adding some material behind the face so the hands will sit closer to your clock face. 

Tip 2) Most hands can be slightly trimmed if need be.

Tip 3) Our customers also spray paint them. 

Customers also looked at: