USA Made Standard Quartz Clock Mechanisms (up to 1/4" dial face) with Free Hands

Average rating:

102 reviews

Explore all reviews

Quantity	1 - 9	10 - 49	50 - 99	100+
Price	$12.50	$8.25	$5.25	$4.25
Per USA Made Clock Motor. Choose FREE or Premium Clock Hands

US NO TAX, Part #: Q-12

Checkout/Estimate Shipping

Mini Quartz Clock Movements for 1/4 inch thick dial face

These movements made in the US by Takane and work with hands under 5 inches long.

Accurate Within 2 Minutes A Year
1 Year Warranty
OK for outdoor use if sheltered from rain.

Click just above on "Choose your hands" to choose your hands for this type of movement. There are about 25 free hand options available and many more for purchase.

Please note free hands are only available per each movement purchased and if not selected at time of purchase, there will be an extra shipping charge. Also note that hangers and the rubber washer are sold separately - find them at the same spot as where you choose your hands.

Need hands longer than 5 inches? Click here for high torque options

Specifications

Dimensions: 2-1/8 inch x 2-1/8 inch x 5/8 inch thick

Overall Shaft Length: 5/8"

Threaded Shaft Length: 5/16"

American I Shaft Diameter: 5/16 inch

Runs on 1 (AA) Size Battery

Runs up to 4.5" Clock Hands

Fits 3 inch Diameter Hole or Flush Mount

Works with material up to 1/4" thick

Hardware Included

Brass Washer

Hex Nut

Open End Nut

Hangers sold separately

Optional Hardware

Add an Black Endcap for $0.50	Quantity
or Add an Endcap for $0.50	Quantity

Average rating:

102 reviews

Write a Review || Explore all reviews

Featured positive reviews:

Quartz Clocks 04/10/2015
By David Oblinger
We had two mini clocks that were not operating. We were able to work with Bearwood and got the components. The clocks were easily repaired within 15 mins each and are accurately displaying the time.

The experience with Bearwood was fantastic!

Great company 08/22/2017
By Duane Throckmorton
While I have not actually put the clock works to use yet I can say the overall ordering packaging and arrival was fantastic. If I had not read about them from Steve Good I would not have known about them. I will be ordering from them in the future.

Easy 07/31/2017
By Peter Sharpe
The movement was easily installed using the online diagram. It appears to be of a much better manufacture than others I've previously purchased. So far,over the past week, it is keeping excellent time.The free set of hands was a nice addition.

Mini quartz Movement 09/25/2017
By Dan Speed
My original movement was an Elgin, and this new one was very close in design to it. A bit short on the shaft, but I just left out my spacer and it all went together and worked very nicely.

Excellent product 05/27/2018
By Gerald McQuinn
My first purchase from BW, Order two Quartz movements and hands. When it arrived, I thought the worse as the box was in very sad shape. It literally appeared to have driven over with a bicycle as there was a 2" wide groove on both sides and these were 1" deep. I thought there was no way the movements would not be damaged. Fortunately the movements were bubble wrapped well. I installed one of the movements and it works perfectly, I'm saving the other for a future project. The hand set was bent a bit although only required a bit of convincing to straighten everything. Clock fit and works perfect, I like the very precise movement and it appears to be accurate. thanks and thanks for the bubble wrapped protection, it worked!

CLOCKS 12/31/2015
By DONALD KELLY
Clocks arrived nicely packaged and in time for Christmas gifts which I had made out of CD's. I wash't expecting them until mid January. I was very impressed with this awesome service from Bear Woods. Will be ordering another 20 clocks in the near future. Clocks all work perfect, easy to assemble. It's important to make sure you select the proper hands for your project as the first order I put in about a month ago, I had ordered hands that were just a little too long for my CD clocks. Also make sure the clock you order has the correct thickness for the dial face as well. All in all, no complaints and very satisfied with Bear Woods service.
Don Kelly
donkelly@shaw.ca

Works Perfectly! 06/21/2021
By Andrew D Pohlman
I was replacing the clockwork in a garden clock that has a thermometer. I had to futz with the arms to clear the thermometer stem and arm. I got it wrong at first and the clockwork jammed and stopped. I thought I might have broken it - but it resumed working once I adjusted all clearances. Also, the battery electrodes on the new unit are far superior to the original.

I spent a total of $16 for parts and shipping. A new garden clock is about $22. The savings don't seem like much, but I can happily report that I kept the old clock out of the landfill. Recycling/repurposing is important to my wife and I. Besides that, it's now a much better clock!

Very Happy! 02/21/2023
By Debbie Buchanan
When our favorite clock stopped working, I hit the internet (YouTube actually) and came across your video on how to repair your own clock. From there I went to your website and ordered the parts, SO EASY. I watched the video while putting everything together, which made it easy. There was an issue with the clock hands, but customer service handled it quickly. Knowledgeable staff, customer service is stellar. Everything turned out very well and I am very happy. My clock works again! The only thing I would like to see are larger hour hands (width). For my senior eyes itâ€™s a little difficult to differentiate the hour and minute hands..

Great Clock Movement 10/31/2018
By Fred Todd
The mini quartz movement that I bought to replace the one in an old table top clock I have. The movement fit perfectly in the clock and the hands that came with it were better than the original ones. It was easy to install without modification, all the screw holes lined up. I had the new movement in the clock in under fifteen minutes. And the clock runs like new again. My wife was really happy to have her clock working. I would recommend following the instructions on how to take measurements and make sure you take a careful look at the pictures of the movement that you are considering on purchasing.

Happy customer 4 star 01/10/2013
By Sharon Beasley
These clock parts are easy to assemble and work just fine. I have used hundreds of them for clocks that I make and sell. I have never had a customer complaint which makes me very happy. The added bonus is that they are made in USA, and while I would be happier if they were Canadian made, finding anything made in North America is a coup. I am also a great fan of the straight hands which look sleek and modern and the spade hands for a more traditional look.

Satisfied customer 06/17/2021
By Scooter Oglesby
Good folks to work with. Good price. Decent shipping time.

Had issue with wrong hands being sent with order, they sent correct ones quickly with no hesitation.

Clock hands are a little lighter weight than what I've used in the past from another company but they look good never-the-less.

As I said earlier, good company to work with and will reorder when necessary.

Great products/slow delivery 01/11/2014
By Sheryl Hendrickson
I have used these products before, from another distributor, and found them equality satisfactory for the little clocks we were making for Cub Scouts. However, I paid for the two day shipping, and the items arrived about 8 days after ordering, after our last meeting before Christmas, so we had to plan a special meeting the day before Christmas for the boys to finish the project.

clock movement 04/29/2018
By LEROY KINGMAN
this perfectly replaces my old movement, which was losing time daily. Unlike some other vendors, Bear Woods Supply gave me all the info and dimensions that I needed to select the proper replacement movement. Shipping was prompt, and I received it within a few days after ordering. And it seems to be keeping perfect time. Couldn't be happier!

Mini quartz movement 04/10/2018
By roger stanko
Supplied items as ordered. Had an issue with installing the Seconds hand as my old mechanism had a much smaller shaft. The Seconds hand supplied did fit with firm pressure applied. The slits on opposing sides of the Seconds hand enabled this.

Got installation help from the President of Bearwood. GOOD customer service. Thank you. >

Great parts 06/29/2022
By Michael Ryan
The parts work great. I had a problem with the hour hand, the mounting hole in the hour hand was too big and it did not fit the movement. I reused the old hour hand from my worn out movement. I notified your customer service representative (Analies) about the wrong size hole in the hour hand. The clock works and looks great.

Great prices and sized properly 04/21/2019
By Joseph Burger
Thirty minutes after the postman delivered the order, the clock was back in service.
It could not have been simpler.
Great prices and clockworks sized properly for a problematic fit.
It took longer to find your website than to repair the clock.
You are my new go to place for clock parts.

Happy with purchase 01/08/2020
By CLAIR KERSTETTER
I would order a longer stem of I had it to do over just made through wood with just enough to get nut on. That was my fault when ordering. The clock is working find and keeping correct time. It was not difficult to do. I would order again if I needed a replacement for any other battery operated clock.

Just Right! 06/01/2020
By Glenn Torgerson
We are very happy with our purchase. It was perfect for the old "mantel horse clock" that had sentmental value to us. The clock was electric and was very loud when plugged in. Now it runs smooth and quiet and with no cord to be plugged in we can put it on a shelf where we can enjoy it.
Thank you!

clock parts 02/01/2019
By Lana Rich
I ordered a clock movement for a 1/4 in. face. When I received it the wrong one was sent. I called and explained. No problem, they acknowledged the error and sent out another one. I haven't received it yet but hopefully it works. I am very pleased with the service.

old clock project 10/03/2020
By Anne Norris
Using your website, along with the videos, I was able to purchase and install the working parts on a 50 year clock project that has been following my family around. Now there is a working clock on the wall to hand off to another family member. Thank you Bear Woods!

Clock Rocks 09/13/2018
By James Palmer
Good product, Good price, received a in timely manner. And someone actually wrote "THANK YOU" on the product receipt. Those two words were the icing on the cake!
I will make purchases from your company again.
Please accept my THANK YOU in return.

very satisfied 05/07/2022
By Mark Long
these folks stand behind there products. i had issues with timepiece unit, taked with krista ,and she sent another unit and all is good. Krista was professional , polite ,very good representing her company. these folks take care of their customers.

Just what I ordered 07/07/2019
By SHARON CRUMP
Although I measured the piece I was replacing, it still turned out to be a shade too short. It isn't worth paying additional shipping plus restocking fee for the cost of the clock part. The part itself was perfect though and great packing too!

Very satisfied 09/16/2021
By Ken Stone
Bearwood is a company that cares about their customers, offers quality products, and provides excellent service! Always enjoy calling and speaking with such wonderful employees. One of the best companies that Iâ€™ve dealt with. Thank you!

Fabulous customer service 06/03/2021
By LInda Sequeira
I had trouble placing my order online and when I called, Leanne talked me through it very patiently and then when I was wondering how to install the parts I had ordered she emailed me directions with pics . I am very pleased

Happy! Placing another order 03/07/2021
By Daniel Palma
My first order arrived recently and I am very satisfied. I am an artist and decided to try art clocks. It appears they will be quite popular. I'm placing order later for at least another 10 more movements and various parts.

Happy customer 08/17/2019
By Todd Banks
Not that easy to "slip in", took 20 min. to install, perhaps instructions would help, had to use extra washers to fit but working well now. Good price, 1 week delivery which was reasonable for across Canada.

Accurate 12/03/2018
By Frank Dundek
Quiet movement that has been accurate for the week it's been running. Be aware the "free hands" are few and far between. I couldn't determine which ones were free and which were not until I called.

Quartz movement 01/25/2019
By James Fuller
Exactly what I needed to replace the non-working part of my homemade clock. The instructional videos were great in helping me order and replace the right item. Great service and fast shipping.

Works like a charm 06/05/2014
By Andrea Rahal
I placed a fair size bulk order of these clock parts and was pleased with the ease of assembly. I also tested each clock with a battery and every single one worked!

Great experience! 04/10/2019
By Louise Griep
Website worked, clear guides to selection, ordering was easy, parts arrived quickly and in working order, all is replaced on my old clock face and it was a breeze!

Great Clock Parts 05/21/2023
By Ken Stone
Everything about Bearwood is awesome! Quality service and parts! Always been a very happy customer. First place I go when looking for parts or advice! Thumbs up!!!

Happy Customer 08/12/2019
By Andre
Thank you for your excellent service !
- With the parts I ordered from your website,
I was able to give my old clock a second life.

Thanks again !

Replacement Movement 12/01/2018
By David George
Informative website, quick delivery, item as described, works as promised; could have used a bit more item documentation but superior overall experience. Thanks.

nice clock hands 06/02/2018
By scott
these clock hands fit my project perfectly! I would have preferred to have the second hand instead of a red color, match the other hands which are brass colored

Extremely Happy 01/13/2021
By Gail Connelly
Bearwood products are of excellent quality and my shipment arrived very fast! I would recommend this business to anyone and will definitely do with them again!

Mini Clock Movements 12/18/2017
By Nathalie Hammond
American Made Mini Clock Movements (up to 1/4" thick dial face) was the perfect fit for my clock works beautifully very happy with purchase.

Clock Movements 04/22/2019
By Paul Gifford
Arrived on time and in good order. They were the perfect size to replace ones in a 20-year-old Craftsman Saw blade collector clock. Installation was easy.

clock works 12/01/2018
By Dale Cameron
we are just starting to on-line order thigns and were very happy with the order, arrival, delivery placement and product. thank you- it all worked well.

Very Pleased 12/21/2018
By Brandy Hlady
I am very pleased with the products I received and the efficient shipping and quality packaging of all items. I will be ordering again in the future.

works great 07/19/2020
By Keith Carr
Was concerned about shaft length as it was for a Villory & Bach clock but it worked.

tHANKS FOR BEING ABLE TI SELECT HAND DESIGN.

great quality 02/14/2022
By Willam Underwood
It really helped in the instructions as to what and how to measure for what you have and what size to order. My order fit perfectly.

Perfect 09/28/2020
By Douglas Iannotta
Everything was perfect! The mechanism, hands, hanger installed easily with no fuss. Clock is back on the wall keeping perfect Time.

Satisfied! 02/10/2020
By Roger Ream
I am very satisfied with the movement I got. It
arrived quickly and in one piece. I would deal with Bear Woods in the future.

Clock parts 04/01/2019
By John Dixon
Order and received the clock movement and hour & minute hand. Had to call back, tech forgot to include second hand. Work great.

Happy Customer 07/16/2021
By Pepper
Good quality, clocks are keeping perfect time. Received the items super quick. Will definitely deal with this company again.

Mini quartz movement 08/20/2018
By Salvatore Pepe
Great products,pricing, & reliability. This was my second order and I have experienced a very smooth transaction each time.

great results 12/07/2018
By Dale Cameron
this was excellent service. punctual. good replacement, which is what we needed. fast arrival. can't get much better.

Pleased customer 07/23/2021
By Ethel Bulsterbaum
I didn't know how to correctly order the "RIGHT" size but you web site helped to a T. It fits well and easy to install.

Tips

Install a FRESH Duracell or Energizer Battery (But not a rechargeable type). In our experience, these are the only batteries that are reliable for clock mechanisms. Sometimes you will even try a separate pack as not all new packs have perfect batteries.

Sizing and Selection Guide

Click Here to Learn How To Choose the Correct Clock Parts!
What To Measure. What Are the Options.

Choose hands - the options here will fit your clock motor. We recommend our new, balanced hands.

Click the tab "Choose Hands" to see hands that go with this clock motor.

Optional Accessories

Closed End Caps - This movement ships with an open end nut so you can also attach a second hand. For a different look, choose a closed end cap - we have options in black and brass color.